MA-13905[Android] add new target flash_b0_all_ddr to make M4 image run

in DDR RAM

As the default M4 image has replaced to DDR build type, need to change
the entry address of M4 image to DDR.
Signed-off-by: Zhang Bo <bo.zhang@nxp.com>

iMX8QX/soc.mak

@@ -237,6 +237,9 @@ flash_spl_nand_container: $(MKIMG) mx8qx-ahab-container.img scfw_tcm.bin u-boot-
 flash_all flash_b0_all: $(MKIMG) mx8qx-ahab-container.img scfw_tcm.bin u-boot-atf.bin CM4.bin
 	./$(MKIMG) -soc QX -rev B0 -append mx8qx-ahab-container.img -c -scfw scfw_tcm.bin -ap u-boot-atf.bin a35 0x80000000 -m4 CM4.bin 0 0x34FE0000 -out flash.bin
 
+flash_b0_all_ddr: $(MKIMG) mx8qx-ahab-container.img scfw_tcm.bin u-boot-atf.bin CM4.bin
+	./$(MKIMG) -soc QX -rev B0 -append mx8qx-ahab-container.img -c -scfw scfw_tcm.bin -ap u-boot-atf.bin a35 0x80000000 -m4 CM4.bin 0 0x88000000 -out flash.bin
+
 flash_all_trusty flash_b0_all_trusty: $(MKIMG) mx8qx-ahab-container.img scfw_tcm.bin u-boot-atf.bin CM4.bin tee.bin
 	./$(MKIMG) -soc QX -rev B0 -append mx8qx-ahab-container.img -c -scfw scfw_tcm.bin -ap u-boot-atf.bin a35 0x80000000 -data tee.bin 0x84000000 -m4 CM4.bin 0 0x34FE0000 -out flash.bin