ENGR00161124 [dvfs, cpufreq] Use regulator API to set cpu voltage

Change dvfs driver and cpufreq driver to use regulator API to set cpu voltage.
Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com>

arch/arm/mach-mx5/Makefile

@@ -4,7 +4,7 @@
 
 # Object file lists.
 obj-y   := cpu.o mm.o devices.o ehci.o bus_freq.o sdram_autogating.o  \
-pm.o system.o suspend.o usb_dr.o usb_h1.o usb_h2.o
+pm.o system.o suspend.o usb_dr.o usb_h1.o usb_h2.o cpu_regulator-mx5.o
 
 obj-$(CONFIG_SOC_IMX50) += clock_mx50.o mm-mx50.o mx50_wfi.o mx50_suspend.o mx50_freq.o mx50_ddr_freq.o
 obj-$(CONFIG_SOC_IMX51) += clock.o

arch/arm/mach-mx5/board-mx50_rdp.c

@@ -93,15 +93,10 @@
 #define MX50_RDP_SD3_WP		IMX_GPIO_NR(5, 28) 	/*GPIO_5_28 */
 #define MX50_RDP_USB_OTG_PWR	IMX_GPIO_NR(6, 25)	/*GPIO_6_25*/
 
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx5_set_cpu_voltage(struct regulator *gp_reg, u32 cpu_volt);
-
 extern int mx50_rdp_init_mc13892(void);
-
+extern void mx5_cpu_regulator_init(void);
 extern char *lp_reg_id;
-
-static char *gp_reg_id;
-static struct regulator *cpu_regulator;
+extern char *gp_reg_id;
 static int max17135_regulator_init(struct max17135 *max17135);
 
 static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
@@ -795,18 +790,6 @@ static struct mxc_regulator_platform_data rdp_regulator_data = {
 	.vcc_reg_id = "lp_vcc",
 };
 
-static int mx50_rdp_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-	if (!IS_ERR(cpu_regulator))
-		ret = mx5_set_cpu_voltage(cpu_regulator, cpu_volt);
-
-	return ret;
-}
-
 static const struct esdhc_platform_data mx50_rdp_sd1_data __initconst = {
 	.cd_gpio = MX50_RDP_SD1_CD,
 	.wp_gpio = MX50_RDP_SD1_WP,
@@ -825,7 +808,6 @@ static const struct esdhc_platform_data mx50_rdp_sd3_data __initconst = {
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
-	set_cpu_voltage = mx50_rdp_set_cpu_voltage;
 }
 
 static void mx50_rdp_usbotg_vbus(bool on)
@@ -900,6 +882,8 @@ static void __init mx50_rdp_board_init(void)
 	imx50_add_busfreq();
 
 	mx50_rdp_init_usb();
+
+	mx5_cpu_regulator_init();
 }
 
 static void __init mx50_rdp_timer_init(void)

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -84,11 +84,8 @@
 #define	MX51_USB_PLL_DIV_24_MHZ	0x02
 
 extern char *lp_reg_id;
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx5_set_cpu_voltage(struct regulator *gp_reg, u32 cpu_volt);
-
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
+extern char *gp_reg_id;
+extern void mx5_cpu_regulator_init(void);
 
 static struct gpio_keys_button babbage_buttons[] = {
 	{
@@ -562,19 +559,6 @@ static struct i2c_board_info mxc_i2c_hs_board_info[] __initdata = {
 
 static struct mxc_gpu_platform_data gpu_data __initdata;
 
-static int mx51_bbg_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-	if (!IS_ERR(cpu_regulator))
-		ret = mx5_set_cpu_voltage(cpu_regulator, cpu_volt);
-
-	return ret;
-
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
@@ -586,8 +570,6 @@ static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 	int fb_mem = 0;
 	char *str;
 
-	set_cpu_voltage = mx51_bbg_set_cpu_voltage;
-
 	for_each_tag(mem_tag, tags) {
 		if (mem_tag->hdr.tag == ATAG_MEM) {
 			total_mem = mem_tag->u.mem.size;
@@ -826,6 +808,7 @@ static void __init mx51_babbage_init(void)
 
 	imx51_add_dvfs_core(&bbg_dvfscore_data);
 	imx51_add_busfreq();
+	mx5_cpu_regulator_init();
 }
 
 static void __init mx51_babbage_timer_init(void)

arch/arm/mach-mx5/board-mx53_ard.c

@@ -61,12 +61,9 @@
 #define ARD_SSI_STEERING		(MAX7310_BASE_ADDR + 6)
 #define ARD_GPS_RST_B			(MAX7310_BASE_ADDR + 7)
 
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
-
+extern char *gp_reg_id;
 extern char *lp_reg_id;
-extern void (*set_cpu_voltage)(u32 volt);
-extern int mx5_set_cpu_voltage(struct regulator *gp_reg, u32 cpu_volt);
+extern void mx5_cpu_regulator_init(void);
 
 static iomux_v3_cfg_t mx53_ard_pads[] = {
 	/* UART */
@@ -354,22 +351,9 @@ static struct mxc_regulator_platform_data ard_regulator_data = {
 	.cpu_reg_id = "SW1",
 };
 
-static int mx53_ard_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-	if (!IS_ERR(cpu_regulator))
-		ret = mx5_set_cpu_voltage(cpu_regulator, cpu_volt);
-
-	return ret;
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
-	set_cpu_voltage = mx53_ard_set_cpu_voltage;
 }
 
 static inline void mx53_ard_init_uart(void)
@@ -501,6 +485,8 @@ static void __init mx53_ard_board_init(void)
 
 	imx53_init_audio();
 
+	mx5_cpu_regulator_init();
+
 	/* this call required to release SCC RAM partition held by ROM
 	  * during boot, even if SCC2 driver is not part of the image
 	  */

arch/arm/mach-mx5/board-mx53_evk.c

@@ -80,11 +80,8 @@
 #define ARM2_LCD_CONTRAST		IMX_GPIO_NR(4, 20)	/* GPIO_4_20 */
 
 extern char *lp_reg_id;
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx5_set_cpu_voltage(struct regulator *gp_reg, u32 cpu_volt);
-
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
+extern char *gp_reg_id;
+extern void mx5_cpu_regulator_init(void);
 
 static iomux_v3_cfg_t mx53common_pads[] = {
 	MX53_PAD_EIM_WAIT__GPIO5_0,
@@ -728,22 +725,9 @@ static struct mxc_regulator_platform_data evk_regulator_data = {
 	.vcc_reg_id = "SW2",
 };
 
-static int mx53_evk_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-	if (!IS_ERR(cpu_regulator))
-		ret = mx5_set_cpu_voltage(cpu_regulator, cpu_volt);
-
-	return ret;
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
-	set_cpu_voltage = mx53_evk_set_cpu_voltage;
 }
 
 static void __init mx53_evk_board_init(void)
@@ -797,6 +781,8 @@ static void __init mx53_evk_board_init(void)
 	imx53_add_spdif_dai();
 	imx53_add_spdif_audio_device();
 
+	mx5_cpu_regulator_init();
+
 	/* this call required to release SCC RAM partition held by ROM
 	  * during boot, even if SCC2 driver is not part of the image
 	  */

arch/arm/mach-mx5/board-mx53_loco.c

@@ -73,15 +73,11 @@ extern void __iomem *gpc_base;
 extern void __iomem *ccm_base;
 extern void __iomem *imx_otg_base;
 extern char *lp_reg_id;
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx5_set_cpu_voltage(struct regulator *gp_reg, u32 cpu_volt);
-
+extern char *gp_reg_id;
+extern void mx5_cpu_regulator_init(void);
 extern int __init mx53_loco_init_da9052(void);
 extern int __init mx53_loco_init_mc34708(u32 int_gpio);
 
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
-
 static iomux_v3_cfg_t mx53_loco_pads[] = {
 	/* FEC */
 	MX53_PAD_FEC_MDC__FEC_MDC,
@@ -599,17 +595,6 @@ static struct mxc_regulator_platform_data loco_regulator_data = {
 	.cpu_reg_id = "cpu_vddgp",
 };
 
-static int mx53_loco_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-	if (!IS_ERR(cpu_regulator))
-		ret = mx5_set_cpu_voltage(cpu_regulator, cpu_volt);
-	return ret;
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
@@ -621,8 +606,6 @@ static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 	int fb_mem = SZ_32M;
 	char *str;
 
-	set_cpu_voltage = mx53_loco_set_cpu_voltage;
-
 	for_each_tag(mem_tag, tags) {
 		if (mem_tag->hdr.tag == ATAG_MEM) {
 			total_mem = mem_tag->u.mem.size;
@@ -782,6 +765,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_mxc_scc2();
 	imx53_add_dvfs_core(&loco_dvfs_core_data);
 	imx53_add_busfreq();
+	mx5_cpu_regulator_init();
 }
 
 static void __init mx53_loco_timer_init(void)

arch/arm/mach-mx5/board-mx53_smd.c

@@ -84,13 +84,10 @@
 static struct clk *sata_clk, *sata_ref_clk;
 
 extern char *lp_reg_id;
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx5_set_cpu_voltage(struct regulator *gp_reg, u32 cpu_volt);
-
+extern char *gp_reg_id;
+extern void mx5_cpu_regulator_init(void);
 extern int mx53_smd_init_da9052(void);
-
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
+extern void mx5_cpu_regulator_init(void);
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -745,22 +742,9 @@ static struct mxc_regulator_platform_data smd_regulator_data = {
 	.cpu_reg_id = "DA9052_BUCK_CORE",
 };
 
-static int mx53_smd_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-	if (!IS_ERR(cpu_regulator))
-		ret = mx5_set_cpu_voltage(cpu_regulator, cpu_volt);
-
-	return ret;
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
-	set_cpu_voltage = mx53_smd_set_cpu_voltage;
 }
 
 static void __init mx53_smd_board_init(void)
@@ -848,6 +832,8 @@ static void __init mx53_smd_board_init(void)
 	  * during boot, even if SCC2 driver is not part of the image
 	  */
 	imx53_add_mxc_scc2();
+
+	mx5_cpu_regulator_init();
 }
 
 static void __init mx53_smd_timer_init(void)

arch/arm/mach-mx5/cpu.c

@@ -172,18 +172,6 @@ static int get_mx50_srev(void)
 	return 0;
 }
 
-int mx5_set_cpu_voltage(struct regulator *gp_reg, u32 cpu_volt)
-{
-	u32 ret = 0;
-
-	if (!IS_ERR(gp_reg)) {
-		ret = regulator_set_voltage(gp_reg, cpu_volt, cpu_volt);
-		if (ret < 0)
-			printk(KERN_DEBUG "COULD NOT SET GP VOLTAGE!!!!\n");
-	}
-	return ret;
-}
-
 /*
  * Returns:
  *	the silicon revision of the cpu

arch/arm/mach-mx5/cpu_regulator-mx5.c

+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <mach/hardware.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+
+struct regulator *cpu_regulator;
+char *gp_reg_id;
+
+
+void mx5_cpu_regulator_init(void)
+{
+	cpu_regulator = regulator_get(NULL, gp_reg_id);
+	if (IS_ERR(cpu_regulator))
+		printk(KERN_ERR "%s: failed to get cpu regulator\n", __func__);
+}
+

arch/arm/mach-mx6/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o system.o devices.o dummy_gpio.o irq.o bus_freq.o usb_dr.o usb_h1.o usb_h2.o usb_h3.o pm.o cpu_op-mx6.o mx6_wfi.o mx6_fec.o mx6_anatop_regulator.o
+obj-y   := cpu.o mm.o system.o devices.o dummy_gpio.o irq.o bus_freq.o usb_dr.o usb_h1.o usb_h2.o usb_h3.o pm.o cpu_op-mx6.o mx6_wfi.o mx6_fec.o mx6_anatop_regulator.o cpu_regulator-mx6.o
 
 obj-$(CONFIG_ARCH_MX6) += clock.o mx6q_suspend.o
 obj-$(CONFIG_MACH_MX6Q_ARM2) += board-mx6q_arm2.o

arch/arm/mach-mx6/board-mx6q_arm2.c

@@ -37,7 +37,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
-#include <linux/regulator/consumer.h>
 #include <linux/pmic_external.h>
 #include <linux/pmic_status.h>
 #include <linux/ipu.h>
@@ -114,10 +113,8 @@ static int flexcan_en;
 
 extern struct regulator *(*get_cpu_regulator)(void);
 extern void (*put_cpu_regulator)(void);
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx6_set_cpu_voltage(u32 cpu_volt);
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
+extern char *gp_reg_id;
+extern void mx6_cpu_regulator_init(void);
 
 static iomux_v3_cfg_t mx6q_arm2_pads[] = {
 
@@ -1379,23 +1376,9 @@ static struct mxc_dvfs_platform_data arm2_dvfscore_data = {
 	.delay_time = 80,
 };
 
-static int mx6_arm2_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-
-	if (!IS_ERR(cpu_regulator))
-		ret = regulator_set_voltage(cpu_regulator,
-						    cpu_volt, cpu_volt);
-	return ret;
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
-	set_cpu_voltage = mx6_arm2_set_cpu_voltage;
 }
 
 static int __init early_enable_spdif(char *p)
@@ -1525,6 +1508,8 @@ static void __init mx6_board_init(void)
 	imx6q_add_vpu();
 	imx6q_init_audio();
 	platform_device_register(&arm2_vmmc_reg_devices);
+	mx6_cpu_regulator_init();
+
 	imx_asrc_data.asrc_core_clk = clk_get(NULL, "asrc_clk");
 	imx_asrc_data.asrc_audio_clk = clk_get(NULL, "asrc_serial_clk");
 	imx6q_add_asrc(&imx_asrc_data);

arch/arm/mach-mx6/board-mx6q_sabreauto.c

@@ -37,7 +37,6 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
-#include <linux/regulator/consumer.h>
 #include <linux/pmic_external.h>
 #include <linux/pmic_status.h>
 #include <linux/ipu.h>
@@ -112,10 +111,8 @@ static int mipi_sensor;
 
 extern struct regulator *(*get_cpu_regulator)(void);
 extern void (*put_cpu_regulator)(void);
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx6_set_cpu_voltage(u32 cpu_volt);
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
+extern char *gp_reg_id;
+extern void mx6_cpu_regulator_init(void);
 
 static iomux_v3_cfg_t mx6q_sabreauto_pads[] = {
 
@@ -1294,23 +1291,9 @@ static struct mxc_dvfs_platform_data sabreauto_dvfscore_data = {
 	.delay_time = 80,
 };
 
-static int mx6_sabreauto_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-
-	if (!IS_ERR(cpu_regulator))
-		ret = regulator_set_voltage(cpu_regulator,
-						    cpu_volt, cpu_volt);
-	return ret;
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
-	set_cpu_voltage = mx6_sabreauto_set_cpu_voltage;
 }
 
 static int __init early_enable_mipi_sensor(char *p)
@@ -1457,6 +1440,7 @@ static void __init mx6_board_init(void)
 	imx6q_add_vpu();
 	imx6q_init_audio();
 	platform_device_register(&sabreauto_vmmc_reg_devices);
+	mx6_cpu_regulator_init();
 	imx_asrc_data.asrc_core_clk = clk_get(NULL, "asrc_clk");
 	imx_asrc_data.asrc_audio_clk = clk_get(NULL, "asrc_serial_clk");
 	imx6q_add_asrc(&imx_asrc_data);

arch/arm/mach-mx6/board-mx6q_sabrelite.c

@@ -92,12 +92,11 @@
 void __init early_console_setup(unsigned long base, struct clk *clk);
 static struct clk *sata_clk;
 
+extern char *gp_reg_id;
+
 extern struct regulator *(*get_cpu_regulator)(void);
 extern void (*put_cpu_regulator)(void);
-extern int (*set_cpu_voltage)(u32 volt);
-extern int mx6_set_cpu_voltage(u32 cpu_volt);
-static struct regulator *cpu_regulator;
-static char *gp_reg_id;
+extern void mx6_cpu_regulator_init(void);
 
 static iomux_v3_cfg_t mx6q_sabrelite_pads[] = {
 	/* AUDMUX */
@@ -945,23 +944,9 @@ static struct mxc_dvfs_platform_data sabrelite_dvfscore_data = {
 	.delay_time = 80,
 };
 
-static int mx6_sabre_set_cpu_voltage(u32 cpu_volt)
-{
-	int ret = -EINVAL;
-
-	if (cpu_regulator == NULL)
-		cpu_regulator = regulator_get(NULL, gp_reg_id);
-
-	if (!IS_ERR(cpu_regulator))
-		ret = regulator_set_voltage(cpu_regulator,
-						    cpu_volt, cpu_volt);
-	return ret;
-}
-
 static void __init fixup_mxc_board(struct machine_desc *desc, struct tag *tags,
 				   char **cmdline, struct meminfo *mi)
 {
-	set_cpu_voltage = mx6_sabre_set_cpu_voltage;
 }
 
 /*!
@@ -1037,6 +1022,7 @@ static void __init mx6_sabrelite_board_init(void)
 	imx6q_add_dma();
 
 	imx6q_add_dvfs_core(&sabrelite_dvfscore_data);
+	mx6_cpu_regulator_init();
 
 	imx6q_add_hdmi_soc();
 	imx6q_add_hdmi_soc_dai();

arch/arm/mach-mx6/clock.c

@@ -23,6 +23,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/clkdev.h>
+#include <linux/regulator/consumer.h>
 #include <asm/div64.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
@@ -39,9 +40,8 @@
 
 extern u32 arm_max_freq;
 extern int mxc_jtag_enabled;
+extern struct regulator *cpu_regulator;
 extern struct cpu_op *(*get_cpu_op)(int *op);
-extern int mx6_set_cpu_voltage(u32 cpu_volt);
-
 extern int lp_high_freq;
 extern int lp_med_freq;
 
@@ -4935,10 +4935,6 @@ int __init mx6_clocks_init(unsigned long ckil, unsigned long osc,
 	base = ioremap(GPT_BASE_ADDR, SZ_4K);
 	mxc_timer_init(&gpt_clk[0], base, MXC_INT_GPT);
 
-	/* Set the core to max frequency requested. */
-	mx6_set_cpu_voltage(cpu_op_tbl[0].cpu_voltage);
-	clk_set_rate(&cpu_clk, cpu_op_tbl[0].pll_rate);
-
 	lp_high_freq = 0;
 	lp_med_freq = 0;
 

arch/arm/mach-mx6/cpu.c

@@ -44,21 +44,6 @@ u32 arm_max_freq = CPU_AT_1GHz;
 void __iomem *gpc_base;
 void __iomem *ccm_base;
 
-int mx6_set_cpu_voltage(u32 cpu_volt)
-{
-	u32 reg, val;
-
-	val = (cpu_volt - 725000) / 25000;
-
-	reg = __raw_readl(ANADIG_REG_CORE);
-	reg &= ~(ANADIG_REG_TARGET_MASK << ANADIG_REG0_CORE_TARGET_OFFSET);
-	reg |= ((val + 1) << ANADIG_REG0_CORE_TARGET_OFFSET);
-
-	__raw_writel(reg, ANADIG_REG_CORE);
-
-	return 0;
-}
-
 static int __init post_cpu_init(void)
 {
 	unsigned int reg;

arch/arm/mach-mx6/cpu_regulator-mx6.c

+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+#include <linux/clk.h>
+
+#include <asm/cpu.h>
+
+#include <mach/clock.h>
+#include <mach/hardware.h>
+
+struct regulator *cpu_regulator;
+char *gp_reg_id;
+static struct clk *cpu_clk;
+static int cpu_op_nr;
+static struct cpu_op *cpu_op_tbl;
+extern struct cpu_op *(*get_cpu_op)(int *op);
+
+
+void mx6_cpu_regulator_init(void)
+{
+	cpu_regulator = regulator_get(NULL, gp_reg_id);
+	if (IS_ERR(cpu_regulator))
+		printk(KERN_ERR "%s: failed to get cpu regulator\n", __func__);
+	else {
+		cpu_clk = clk_get(NULL, "cpu_clk");
+		if (IS_ERR(cpu_clk)) {
+			printk(KERN_ERR "%s: failed to get cpu clock\n",
+			       __func__);
+		} else {
+			cpu_op_tbl = get_cpu_op(&cpu_op_nr);
+			/* Set the core to max frequency requested. */
+			regulator_set_voltage(cpu_regulator,
+					      cpu_op_tbl[0].cpu_voltage,
+					      cpu_op_tbl[0].cpu_voltage);
+			clk_set_rate(cpu_clk, cpu_op_tbl[0].pll_rate);
+		}
+	}
+}
+

arch/arm/plat-mxc/cpu.c

@@ -22,7 +22,6 @@
 unsigned int __mxc_cpu_type;
 EXPORT_SYMBOL(__mxc_cpu_type);
 extern int mxc_early_serial_console_init(unsigned long base, struct clk *clk);
-int (*set_cpu_voltage)(u32 volt);
 void (*set_num_cpu_op)(int num);
 
 void mxc_set_cpu_type(unsigned int type)

arch/arm/plat-mxc/cpufreq.c

@@ -42,9 +42,9 @@ static int cpu_op_nr;
 static struct cpu_op *cpu_op_tbl;
 static u32 pre_suspend_rate;
 
+extern struct regulator *cpu_regulator;
 extern int dvfs_core_is_active;
 extern struct cpu_op *(*get_cpu_op)(int *op);
-extern int (*set_cpu_voltage)(u32 cpu_volt);
 
 int set_cpu_freq(int freq)
 {
@@ -66,7 +66,8 @@ int set_cpu_freq(int freq)
 
 	/*Set the voltage for the GP domain. */
 	if (freq > org_cpu_rate) {
-		ret = set_cpu_voltage(gp_volt);
+		ret = regulator_set_voltage(cpu_regulator, gp_volt,
+					    gp_volt);
 		if (ret < 0) {
 			printk(KERN_DEBUG "COULD NOT SET GP VOLTAGE!!!!\n");
 			return ret;
@@ -81,7 +82,8 @@ int set_cpu_freq(int freq)
 	}
 
 	if (freq < org_cpu_rate) {
-		ret = set_cpu_voltage(gp_volt);
+		ret = regulator_set_voltage(cpu_regulator, gp_volt,
+					    gp_volt);
 		if (ret < 0) {
 			printk(KERN_DEBUG "COULD NOT SET GP VOLTAGE!!!!\n");
 			return ret;

arch/arm/plat-mxc/dvfs_core.c

@@ -99,7 +99,7 @@ static int maxf;
 static int minf;
 
 extern void setup_pll(void);
-extern int (*set_cpu_voltage)(u32 cpu_volt);
+extern struct regulator *cpu_regulator;
 
 struct timeval core_prev_intr;
 
@@ -118,7 +118,6 @@ static struct clk *dvfs_clk;
 
 static int cpu_op_nr;
 extern struct cpu_op *(*get_cpu_op)(int *op);
-extern int (*set_cpu_voltage)(u32 cpu_volt);
 
 static inline unsigned long dvfs_cpu_jiffies(unsigned long old, u_int div, u_int mult)
 {
@@ -211,7 +210,8 @@ static int mx5_set_cpu_freq(int op)
 
 		/*Set the voltage for the GP domain. */
 		if (rate > org_cpu_rate) {
-			ret = set_cpu_voltage(gp_volt);
+			ret = regulator_set_voltage(cpu_regulator, gp_volt,
+						    gp_volt);
 			if (ret < 0) {
 				printk(KERN_DEBUG "COULD NOT SET GP VOLTAGE\n");
 				return ret;
@@ -258,7 +258,8 @@ static int mx5_set_cpu_freq(int op)
 		spin_unlock_irqrestore(&mxc_dvfs_core_lock, flags);
 
 		if (rate < org_cpu_rate) {
-			ret = set_cpu_voltage(gp_volt);
+			ret = regulator_set_voltage(cpu_regulator, gp_volt,
+						    gp_volt);
 			if (ret < 0) {
 				printk(KERN_DEBUG
 				       "COULD NOT SET GP VOLTAGE!!!!\n");
@@ -299,7 +300,8 @@ static int mx5_set_cpu_freq(int op)
 		}
 		/* Check if FSVAI indicate freq up */
 		if (podf < arm_podf) {
-			ret = set_cpu_voltage(gp_volt);
+			ret = regulator_set_voltage(cpu_regulator, gp_volt,
+						    gp_volt);
 			if (ret < 0) {
 				printk(KERN_DEBUG
 				       "COULD NOT SET GP VOLTAGE!!!!\n");
@@ -359,7 +361,8 @@ static int mx5_set_cpu_freq(int op)
 		spin_unlock_irqrestore(&mxc_dvfs_core_lock, flags);
 
 		if (vinc == 0) {
-			ret = set_cpu_voltage(gp_volt);
+			ret = regulator_set_voltage(cpu_regulator, gp_volt,
+						    gp_volt);
 			if (ret < 0) {
 				printk(KERN_DEBUG
 				       "COULD NOT SET GP VOLTAGE\n!!!");
@@ -393,7 +396,8 @@ static int mx6_set_cpu_freq(int op)
 
 	if (rate > org_cpu_rate) {
 		/* Increase voltage first. */
-		ret = set_cpu_voltage(gp_volt);