Commit 600639dd authored by Dong Aisheng's avatar Dong Aisheng Committed by Jason Liu

ENGR00163615 mx6q: sabrelite RevC: change GPIO for flexcan

GPIOs used by flexcan are changed on RevC board.
Updating the code for RevC board.
Signed-off-by: default avatarDong Aisheng <b29396@freescale.com>
parent 2c91239e
......@@ -80,8 +80,8 @@
#define MX6Q_SABRELITE_USB_OTG_PWR IMX_GPIO_NR(3, 22)
#define MX6Q_SABRELITE_CAP_TCH_INT1 IMX_GPIO_NR(1, 9)
#define MX6Q_SABRELITE_USB_HUB_RESET IMX_GPIO_NR(7, 12)
#define MX6Q_SABRELITE_CAN1_STBY IMX_GPIO_NR(1, 25)
#define MX6Q_SABRELITE_CAN1_EN IMX_GPIO_NR(1, 27)
#define MX6Q_SABRELITE_CAN1_STBY IMX_GPIO_NR(1, 2)
#define MX6Q_SABRELITE_CAN1_EN IMX_GPIO_NR(1, 4)
#define MX6Q_SABRELITE_SD3_WP_PADCFG (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_MED | \
......@@ -106,9 +106,9 @@ static iomux_v3_cfg_t mx6q_sabrelite_pads[] = {
/* CAN1 */
MX6Q_PAD_KEY_ROW2__CAN1_RXCAN,
MX6Q_PAD_KEY_COL2__CAN1_TXCAN,
MX6Q_PAD_ENET_CRS_DV__GPIO_1_25, /* STNDBY */
MX6Q_PAD_ENET_RXD1__GPIO_1_26, /* NERR */
MX6Q_PAD_ENET_RXD0__GPIO_1_27, /* Enable */
MX6Q_PAD_GPIO_2__GPIO_1_2, /* STNDBY */
MX6Q_PAD_GPIO_7__GPIO_1_7, /* NERR */
MX6Q_PAD_GPIO_4__GPIO_1_4, /* Enable */
/* CCM */
MX6Q_PAD_GPIO_0__CCM_CLKO, /* SGTL500 sys_mclk */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment