- 20 Jul, 2012 17 commits
-
-
Fabio Estevam authored
On mx6qsabrelite there is a total of 1GB of RAM. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com>
-
Richard Zhu authored
In order to save the power consumption, enable the PDDQ mode of AHCI PHY when there is no sata disk on the port Signed-off-by:
Richard Zhu <r65037@freescale.com>
-
Nancy Chen authored
Change dvfs driver and cpufreq driver to use regulator API to set cpu voltage. Signed-off-by:
Nancy Chen <Nancy.Chen@freescale.com>
-
Mahesh Mahadevan authored
Add support for MX6 Sabre-lite board Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-
Dong Aisheng authored
GPIOs used by flexcan are changed on RevC board. Updating the code for RevC board. Signed-off-by:
Dong Aisheng <b29396@freescale.com>
-
Mahesh Mahadevan authored
Fix ensures the regulator API works correctly when adjusting core voltages during DVFS on MX6 Sabre-lite Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-
Dong Aisheng authored
Add flexcan support. Signed-off-by:
Dong Aisheng <b29396@freescale.com>
-
Mahesh Mahadevan authored
Add support for ASRC driver in MX6 sabre-lite Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-
Mahesh Mahadevan authored
Align the implementation, eventually this should go to a common place across MX6 platforms Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-
Mahesh Mahadevan authored
Update the PAD settings to lower pull-up resistor as this was causing WP to not be detected. Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-
make shi authored
Add config USB OC setting code for mx6q, and make the OC default off. After adding it, fixing the loop less code during kernel boot in mx6qLite. Signed-off-by:
make shi <b15407@freescale.com>
-
Fugang Duan authored
- FEC get the default MAC address from OCOTP. - If the MAC address is all zero, get the random address. - But, if add para "fec_mac=xx:xx:xx:xx:xx:xx" in uboot, FEC will get the last MAC address from uboot para. Signed-off-by:
Fugang Duan <B38611@freescale.com>
-
Huang Shijie authored
64k is too small for uboot. So enlarge the partition to 256K. Signed-off-by:
Huang Shijie <b32955@freescale.com>
-
Mahesh Mahadevan authored
Add support to access SST SPI-NOR on MX6 Sabre-lite Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-
Mahesh Mahadevan authored
Add support for HDMI audio on MX6 Sabre-lite Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-
Nancy Chen authored
Add dummy regulators for MMC and SD drivers. Signed-off-by:
Nancy Chen <Nancy.Chen@freescale.com>
-
Mahesh Mahadevan authored
Add support for the MX6 Sabre-lite board Signed-off-by:
Mahesh Mahadevan <r9aadq@freescale.com>
-