Commit c6944801 authored by Ranjani Vaidyanathan's avatar Ranjani Vaidyanathan

ENGR00233705 [MX6SL] -Fix suspend/resume issue when SD1 is used to boot.

Setting certain IOMUX settings on SD1 prevents the system from
entering suspend. These pins are already configured as GPIO, so
it does not help to reconfigure them during suspend.
Signed-off-by: default avatarRanjani Vaidyanathan <ra5478@freescale.com>
parent 11f3fa3d
......@@ -461,6 +461,7 @@ static iomux_v3_cfg_t suspend_enter_pads[] = {
MX6SL_PAD_SD1_DAT5__GPIO_5_9,
MX6SL_PAD_SD1_DAT6__GPIO_5_7,
MX6SL_PAD_SD1_DAT7__GPIO_5_10,
MX6SL_PAD_SD2_CLK__GPIO_5_5,
MX6SL_PAD_SD2_CMD__GPIO_5_4,
MX6SL_PAD_SD2_DAT0__GPIO_5_1,
......@@ -469,18 +470,19 @@ static iomux_v3_cfg_t suspend_enter_pads[] = {
MX6SL_PAD_SD2_DAT3__GPIO_4_28,
MX6SL_PAD_SD2_DAT4__GPIO_5_2,
MX6SL_PAD_SD2_DAT5__GPIO_4_31,
MX6SL_PAD_SD2_DAT6__GPIO_4_29,
MX6SL_PAD_SD2_DAT7__GPIO_5_0,
MX6SL_PAD_SD3_CLK__GPIO_5_18,
MX6SL_PAD_SD3_CMD__GPIO_5_21,
MX6SL_PAD_SD3_DAT0__GPIO_5_19,
MX6SL_PAD_SD3_DAT1__GPIO_5_20,
MX6SL_PAD_SD3_DAT2__GPIO_5_16,
MX6SL_PAD_SD3_DAT3__GPIO_5_17,
/* USBOTG ID pin */
MX6SL_PAD_EPDC_PWRCOM__GPIO_2_11,
MX6SL_PAD_HSIC_STROBE__GPIO_3_20,
MX6SL_PAD_HSIC_DAT__GPIO_3_19,
/* Key row/column */
MX6SL_PAD_KEY_COL0__GPIO_3_24,
MX6SL_PAD_KEY_COL1__GPIO_3_26,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment