Commit e392070a authored by Terry Lv's avatar Terry Lv

ENGR00230538-10: imx6: CAAM: enable secure memory and sm test in defconfig

Enable secure memory and sm test in defconfig.
Signed-off-by: default avatarTerry Lv <r65388@freescale.com>
parent 9e2c060d
......@@ -1068,7 +1068,6 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_MXC is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
......@@ -1640,6 +1639,7 @@ CONFIG_MXC_CAMERA_OV8820_MIPI=m
CONFIG_MXC_CAMERA_OV5642=m
CONFIG_MXC_TVIN_ADV7180=m
CONFIG_MXC_CAMERA_OV5640_MIPI=m
# CONFIG_MXC_MIPI_CSI2_TVIN_ADV7280 is not set
CONFIG_MXC_CAMERA_SENSOR_CLK=m
CONFIG_MXC_IPU_DEVICE_QUEUE_SDC=m
CONFIG_MXC_IPU_PRP_ENC=m
......@@ -1773,7 +1773,6 @@ CONFIG_FB_MXC_TRULY_WVGA_SYNC_PANEL=y
# CONFIG_FB_MXC_CLAA_WVGA_SYNC_PANEL is not set
# CONFIG_FB_MXC_SEIKO_WVGA_SYNC_PANEL is not set
# CONFIG_FB_MXC_SII902X is not set
# CONFIG_FB_MXC_SII902X_ELCDIF is not set
# CONFIG_FB_MXC_CH7026 is not set
# CONFIG_FB_MXC_TVOUT_CH7024 is not set
# CONFIG_FB_MXC_ASYNC_PANEL is not set
......@@ -1856,13 +1855,11 @@ CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_IMX_HDMI=y
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SND_SOC_WM_HUBS is not set
CONFIG_SND_SOC_MXC_HDMI=y
CONFIG_SND_SOC_MXC_SPDIF=y
CONFIG_SND_SOC_SGTL5000=y
CONFIG_SND_SOC_CS42888=y
CONFIG_SND_SOC_WM8962=y
# CONFIG_SND_SOC_WM8994 is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
......@@ -2698,6 +2695,9 @@ CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
# CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_TEST is not set
CONFIG_CRYPTO_DEV_FSL_CAAM_SM=y
CONFIG_CRYPTO_DEV_FSL_CAAM_SM_SLOTSIZE=7
CONFIG_CRYPTO_DEV_FSL_CAAM_SM_TEST=y
# CONFIG_BINARY_PRINTF is not set
#
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment