README: Uboot comment, and path fix

- Note: All binaries are built from these release onwards. Fix the build directory.
- Fix the deploy directory path
parent 29bb6bc8
......@@ -56,7 +56,7 @@ Afterwards if anything is updated the image must be bitbaked again.
--------------
In order to transfer the image to a uSD card, follow the next steps changing sdX for your detected device:
$ cd ~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/
$ cd ~/yocto/build/tmp/deploy/images/cgtqmx6/
$ sudo dd if=/dev/zero of=/dev/sdX count=1000 bs=512
$ sudo sfdisk --force -uM /dev/sdX <<EOF
10,,83
......@@ -71,7 +71,7 @@ In order to transfer the image to a uSD card, follow the next steps changing sdX
----------
An uSD is needed as a bridge, then the first step is follow the steps of "Transfer the root file system to a micro SD card", and transfer the image tar.bz2 file to the micro SD with the following command:
$ cd ~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/
$ cd ~/yocto/build/tmp/deploy/images/cgtqmx6/
$ sudo mount /dev/sdX1 /mnt
$ sudo cp fsl-image-machine-test-cgtqmx6-xxxxxxxxxxxxxx.tar.bz2 /mnt
$ sync
......@@ -99,7 +99,7 @@ Stop the autoboot pressing any key:
---------------
In order to transfer the image to a SD card, follow the next steps changing sdX for your detected device:
$ cd ~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/
$ cd ~/yocto/build/tmp/deploy/images/cgtqmx6/
$ sudo dd if=/dev/zero of=/dev/sdX count=1000 bs=512
$ sudo sfdisk --force -uM /dev/sdX <<EOF
10,,83
......@@ -121,6 +121,8 @@ Boot the system and stop the autoboot pressing any key:
3. U-boot
---------
The QMX6 board must be flashed with the file: "~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/u-boot-pn0161XY-2013.04-r0.imx" using the Manufacturing tool.
From this release onwards, for every part number supported the U-boot binary is built, and can be found in the deploy folder "~/yocto/build/tmp/deploy/images/cgtqmx6/" with the following name: u-boot-pn0161XY-2013.04-r0.imx
The QMX6 board must be flashed with the appropriate file: "~/yocto/build/tmp/deploy/images/cgtqmx6/u-boot-pn0161XY-2013.04-r0.imx" using the Manufacturing tool.
(c) 2015, Alex de Cabo, congatec AG
......@@ -56,7 +56,7 @@ Afterwards if anything is updated the image must be bitbaked again.
--------------
In order to transfer the image to a uSD card, follow the next steps changing sdX for your detected device:
$ cd ~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/
$ cd ~/yocto/build/tmp/deploy/images/cgtqmx6/
$ sudo dd if=/dev/zero of=/dev/sdX count=1000 bs=512
$ sudo sfdisk --force -uM /dev/sdX <<EOF
10,,83
......@@ -71,7 +71,7 @@ In order to transfer the image to a uSD card, follow the next steps changing sdX
----------
An uSD is needed as a bridge, then the first step is follow the steps of "Transfer the root file system to a micro SD card", and transfer the image tar.bz2 file to the micro SD with the following command:
$ cd ~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/
$ cd ~/yocto/build/tmp/deploy/images/cgtqmx6/
$ sudo mount /dev/sdX1 /mnt
$ sudo cp fsl-image-machine-test-cgtqmx6-xxxxxxxxxxxxxx.tar.bz2 /mnt
$ sync
......@@ -99,7 +99,7 @@ Stop the autoboot pressing any key:
---------------
In order to transfer the image to a SD card, follow the next steps changing sdX for your detected device:
$ cd ~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/
$ cd ~/yocto/build/tmp/deploy/images/cgtqmx6/
$ sudo dd if=/dev/zero of=/dev/sdX count=1000 bs=512
$ sudo sfdisk --force -uM /dev/sdX <<EOF
10,,83
......@@ -121,6 +121,8 @@ Boot the system and stop the autoboot pressing any key:
3. U-boot
---------
The QMX6 board must be flashed with the file: "~/yocto/build_cgtqmx6/tmp/deploy/images/cgtqmx6/u-boot-pn0161XY-2013.04-r0.imx" using the Manufacturing tool.
From this release onwards, for every part number supported the U-boot binary is built, and can be found in the deploy folder "~/yocto/build/tmp/deploy/images/cgtqmx6/" with the following name: u-boot-pn0161XY-2013.04-r0.imx
The QMX6 board must be flashed with the appropriate file: "~/yocto/build/tmp/deploy/images/cgtqmx6/u-boot-pn0161XY-2013.04-r0.imx" using the Manufacturing tool.
(c) 2015, Alex de Cabo, congatec AG
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment